Contracting

Committed to do it right on time, first time.

Global Suhaimi Company is one of the leading maintenance and corrosion protection companies in the Gulf. We specialize in protection for steel and concrete structures in one of the harshest environments in the world. As a specialist contractor in the field of surface preparation and protective coatings, Global Suhaimi is very active in the oil, gas, petrochemicals, water desalination, power and communications sectors. We protect your valuable assets from rust, corrosion, and fire – all of which can drastically reduce the productive life of expensive structures.

Our highly qualified Saudi and foreign engineers supervise our experienced site crews throughout the Gulf region. All our professional employees have had extensive technical training and have many years of experience. Our permanent workforce is over one thousands strong, and the majority of our employees have been with us for more than 10 years.

Abrasive Blasting And Protective Coating

Purpose
To prepare the surface free from rust and apply suitable coating materials to ensure full protection against corrosion

Reference standards
SSPC, NACE, SWEDISH standards.

Base metals
Steel, concrete, stainless steel, galvanized iron, Tanks of any capacity, structures upto any height, pipes of any diameter from 25mm and more.

Materials used
Abrasives - Copper slag, sand, steel grit, steel shot, garnet.
Coating Materials – Materials from major Paint Manufacturers

Special equipment
Automatic blast machines, vacuum blast machines, special conveyors, internal blast machines suitable for small dia pipes

Specifications achievable
Cleanliness upto SA 2 ½ and SA 3
Anchor pattern suitable for any type of coating

Application Approval / Certification
Approved Applicators of all major Paint Manufacturers within Saudi Arabia.
Approved Contractor for Saudi Aramco, Yanpet, Saudi Electric Company, SABIC group, Bechtel, Siemens, Doosan, Hyundai, Belleli, etc.

Quality Control Activities
Non Destructive Testing : Measurement of Dry Film Thickness and Holiday testing of Tanks and Vessels
Destructive Testing : Adhesion Testing

Purpose
Repairing of Concrete surfaces including rehabilitation of concrete plant structures. Replacement of corroded reinforcement bars

Reference standards
International Concrete Repair Institute (ICRI), American Concrete Institute (ACI) and BRE etc

Base Structures
Heavy Concrete Structures of Bridges and Synchrolift Decks of Sea Ports, Concrete foundation of High Tension Electric Towers, Concrete Tanks, Concrete piles etc.

Materials used
Pre Packed Concrete Materials Special equipment
Concrete Mixers

Specifications achievable
Specification as per ICRI, ACI and BRE etc

Application Approval / Certification
Approved Applicators of all Concrete Repair Materials from major Manufacturers such as Fozan company Ltd., Sumam Trading Est.-Sika Division, Construction Material Chemical Industries, Al Subeaei Industrial Co., Saudi MBT, etc.

Quality Control Activities
Non Destructive Testing
Destructive Testing

Purpose
To ensure full protection of steel and concrete structures against corrosion from highly concentrated acids.

Reference standards
NACE, SSPC and ASTM

Base Structures
Acid Sumps, Steel and Concrete Acid storage tanks

Materials used
Coating Materials – Chemical Resistant Materials from Thortex and Belzona.
 

Application Approval / Certification
Approved Applicators for Thortex and Belzona products
Approved Contractor for Saudi Aramco, Yanpet, SABIC group etc .

Quality Control Activities
Non Destructive Testing : Measurement of Dry Film Thickness and Holiday testing of Tanks and Vessels.
Destructive Testing : Adhesion Testing

Purpose
To give internal protection to Storage Tanks from corrosion and leakage

Reference standards
SSPC, NACE, SWEDISH standards

Base Metals
Steel and concrete Tanks of any capacity

Materials used
Abrasives - Copper slag, sand, steel grit, steel shot, garnet
Lining Materials – Epoxy Resins from Hempel Paints
and Shell Chemicals

Fiberglass Mats and Tissues from Saudi Industrial Resins.

Application Methods
Hand Lay up of Fiberglass mat and Spray application of chopped Fiberglass.

Application Approval / Certification
Approved Applicators of Hempel Paints and Shell Chemicals
Approved Contractor of Saudi Aramco for Fiberglass Lining.

Quality Control Activities
Non Destructive Testing : Measurement of Dry Film Thickness and Holiday testing of Tanks and Vessels after application of Primer.

Purpose
To remove the sludge and sediments from Crude Oil and Fuel Storage Tanks and clean the internal surface.

Reference standards
API standards

Base structure
Storage Tanks of Crude Oil, Heavy and Light Fuel Oil Tanks of any capacity.

Cleaning Materials used
Detergents and Solvents Application Methods
High Pressure Washing with hot water and detergents. Solvent cleaning is carried out if required. Contaminants are removed by Super Sucker.

Application Approval / Certification
Approved Contractor of Saudi Aramco for Sludge Removal and TA.

Purpose
To give internal protection to Storage Tanks from corrosion and leakage.

Base Structure
Steel and concrete Tanks of any capacity.

Materials used
Abrasives - Copper slag, sand, steel grit, steel shot, garnet
Lining Materials – Vinyl Estyrene material or Rubber Sheet
 

Application Method
Hand Lay up of Rubber Sheet Lining material with adhesives.
Spray application of Rubber Lining material

Application Approval / Certification                  Quality Control Activities
Non Destructive Testing : Measurement of Dry Film Thickness and Holiday testing of Tanks and Vessels after application

Purpose
To reduce corrosion of metal surface by providing it with enough cathodic current so that it’s anodic dissolution rate will be negligible.

Reference standards
SSPC, NACE standards

Base Structure
Underside of ship, Steel Piles, Underground Pipes, Underneath of Steel Tank bottom plates, offshore platforms and other tidal areas
 

Material Used
Zinc Anodes and suitable high solid epoxy Lining Materials
 

Application Method
Zinc Anodes welded to the surface at specific distance. Epoxy Lining by Spray application

Application Approval / Certification                  Quality Control Activities
Non Destructive Testing : Measurement of Dry Film Thickness and Holiday testing of Tanks and Vessels after application of Epoxy Lining.

Purpose
Marking of Center Lines, Edge Lines, Arrows, Pedestrian Lines and Parking Lines. Supply and Installation of Reflective Markers, Sign Boards etc.

Reference standards
Specifications of Ministry of Communications, Royal Commission, British and American Standard, Saudi Arabia

Materials used
Thermoplastic Paints and Traffic Cold Paints
Materials conforming to BS3262 – 1987, AASHTO M249 and MOC Specifications.
 

Special Equipment
Road Marking Machines, Road Marking Removing Machines, Thermoplastic Paint Heating Equipments

Specifications achievable
MOC Specifications and Royal Commission Standards applicable in Saudi Arabia.

Application Approval / Certification
Approved Applicators of all major Paint Manufacturers within Saudi Arabia.

Approved Road Marking Contractor for Saudi Aramco, Saudi Electric Company, SABIC group, Airport Authorities etc.

Purpose
Application of suitable fire proofing to provide better protection of concrete and steel structures from fire.

Reference standards
standards               

Base Structure
All types of plant items and Equipments – Concrete and Steel Structures.
                                                                            Materials used
Intumescent Epoxy Fireproofing Materials such as CHARTEK, PITT-CHAR, HTC-32, Thermolog.
Cementitious Fireproofing Materials such as MONOKOTE, ZONOLITE, PYROCRETE, Fendolite M2.
 

Application Methods

Spray Application using Equipment such as Putmeizter Machine, Plural Pump, Hemo Pump etc and Hand Lay up with trowel

Application Approval / Certification
Approved Applicators of CHARTEK, PITT-CHAR and many other major Material Manufacturers.
Approved Contractors of Saudi Aramco, Yanpet, Lubref, Saudi Electric Company, SABIC Group companies etc.

Quality Control Activities
Non Destructive Testing : Measurement of Wet Film Thickness of applied Fireproofing Material.